Vacuum Tubing
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, 1 in ID, 1-1/4 in OD, 50 ft
Tygon E-3603 thermoplastic tubing provides crystal-clear, medical-grade fluid transfer with a glassy-smooth inner bore to minimize buildup. The tubing is non-oxidizing, non-contaminating, and free of BPA and phthalates. This coil is supplied in 50 ft lengths and is suited for laboratory, diagnostic, and medical fluid-handling applications.
- Clear thermoplastic tubing, 1 in inside diameter, 1-1/4 in outside diameter.
- 1/8 in wall thickness, 50 ft coil length.
- Glassy-smooth inner bore reduces buildup and facilitates visual inspection.
- Non-oxidizing and non-contaminating, BPA- and phthalate-free.
- Maximum working pressure 12 psi at 73°F (23°C); vacuum rating 5 inHg (127 mmHg).
- Minimum bend radius 4-3/4 in; maximum recommended operating temperature 165°F (74°C).
Accuflow Systems Saint-Gobain Silicone Tubing, 65 Shore A, 0.38 in ID
Sani-Tech Ultra-65 tubing is an ultra-pure, platinum-cured silicone tube designed for biopharmaceutical and laboratory fluid transfer. The 65 Shore A material provides extended pump life and low extractables while maintaining flexibility across a wide temperature range.
- Platinum-cured silicone for low extractables and biocompatibility.
- 65 Shore A hardness for flexibility and pump longevity.
- Wide temperature range: -80°F to 500°F (-62°C to 260°C).
- 0.38 in inner diameter, 0.75 in outer diameter, approximately 0.19 in wall thickness.
- Supplied on a 100 ft coil for long runs and fewer connections.
- Suitable for peristaltic pump use, fluid transfer, and single-use assemblies.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/8 in I.D., 1/2 in O.D.
Tygon E-1000 ultra-soft tubing from Saint-Gobain is a flexible, low-durometer thermoplastic elastomer tubing designed for laboratory dispensing, peristaltic pump use, and handling corrosive chemicals. Supplied in 50 ft lengths, this tubing remains flexible at very low temperatures and minimizes compression resistance for low-torque pump systems.
- Material: Thermoplastic elastomer.
- Inner diameter: 3/8 in (0.375 in).
- Outer diameter: 1/2 in (0.500 in).
- Wall thickness: 1/16 in (0.063 in).
- Length: 50 ft.
- Hardness: 40 Shore A.
- Operating temperature range: -67°F to 125°F (-55°C to 52°C).
- Typical maximum working pressure for this dimension: 7 psi (0.5 bar).
